Operating Elements And Displays; Signal Tones - CASO DESIGN M20 Manual De Instrucciones

12.2 Operating elements and displays

12.3 Signal tones

The device transmits the following signal sounds as an acoustic feedback signal:
 One signal tone: The device has accepted the entry.
 Two signal tones: The device has not accepted the entry. Check the entry and try
again.
 Three signal tones: The cooking time has ended.
Display panel: Cooking time, output, function display
and actual time are displayed.
Power/sound: Press to set the power level of the
microwave or to switch on/off the sound
Time: Press to set the clock.
Defrost: Press to choose the defrost program.
Programs: Press to choose an automatic program.
Stop: Press to stop the cooking program (1x) and to
delete all previous settings prior to starting the cooking
procedure (2x).
Start/Quickstart: Press to start the cooking
programme or to set the Quick Start cooking
programme.
Time/weight (control dial): Press to set the required
cooking time or weight of the food.
50