Setting The Clock; Microwave" Mode - CASO DESIGN M20 Manual De Instrucciones

13.9 Setting the clock

To set the clock on the device, proceed as follows:
 Activating setup mode
Press the button Time.
Press the button once again to switch the oven from the 24 hour system to
the 12 hour system.
 Setting the hours
Turn the control dial Time/Weight until the correct hour is
displayed.
Press the Time button to save the set hour.
Setting the minutes

Turn the control dial Time/Weight until the correct minute is displayed.
Press the Time button to save the set time.

13.10 "Microwave" mode

With microwave cooking, you can adapt the power level and cooking time.

Select the power level you want by pressing the Power/Sound button until
you reach the level you require (see following table).
 Setting the cooking time
Set the cooking time by turning the Time/Weight control dial.

After selecting the program, press the button Start/Quickstart, to start the
preset cooking programme.
 End of the cooking programme
Once the end of the cooking time is reached, three signal tones will be emitted and END
will appear in the display.
Display Watt
P800 800
P640 640
P480 480
P320 320
P160 160
P0 Low / Keeping warm
Setting the power level
Starting the cooking programme
Power level
100%
High / cooking and broiling
80%
60% Medium high / Cooking of small quantities
40% Medium / simmering
20% Medium low / Defrost
55