Graco FinishPro II 295 24U060 Instrucciones página 55

Problem
Poor air spray pattern
Water in pattern
333114D
What To Check
(If check is OK, go to next check)
1. Air cap or air manifold air ports
clogged.
2. .
Air cap worn
3. Worn spray tip.
1. Water in air line.
What To Do
(When check is not OK, refer to this column)
Soak in solvent to clean.
Replace air cap.
Relieve pressure, page 30. Replace tip. Refer to gun
instruction manual, 313347.
Add Water Separator Kit 257824 to air line.
Basic Troubleshooting
55