Dyna-Glo DGSS1382VCS Manual Del Usuario página 7

ASSEMBLY INSTRUCTIONS
CAUTION: This unit is HEAVY! Do not
3.
attempt to lay the unit on its side without
assistance!
Attach the right front and right rear legs (M) using
three M6 x 12 bolts (BB) per leg. Attach the left leg
assembly (I) using three M6 x 45 bolts (CC).
Hardware Used
BB M6 x 12mm
Bolt
CC M6 x 45mm
Bolt
4. Insert the wheel axle (N) through the holes on the
left leg assembly (I) and attach the left and right
wheel (H) using one M12 nut (EE) per side.
Hardware Used
EE M12 Nut
x 6
x 3
x 2
7
3
CC
I
BB
4
EE
I
N
H
M