Fermax 94891EIc Manual De Instrucciones página 81

Example: We are going to select TRANSFER mode so that the panic calls are
transferred to the Guard Unit in block nº 4.
NOTE:
The central unit designated must have a Guard Unit in panic mode acti-
ve (DAY or MASTER DAY panic mode)
1. Enter programming and select TRANSFER mode with the
arrow keys, as explained on the previous page.
After confirming, the system will ask for the number of the
Central Unit (block) the calls are to be diverted to.
2. Key in the number of the block where the Guard Unit the
calls are to be transferred to, using 2 digits at all times.
In the example, "04".
The display goes back to the standby position.
N. central:
N. central: 04
FIND NAME AND
PRESS
Pag 35