Select Operating Mode - Fermax 94891EIc Manual De Instrucciones

Select Operating MODE

How to select Operating MODE:
0
A
+
3
.
.
.
3
B
1. Press "0"
The display shows a series of dashes.
2. Enter "A" followed by "3" repeatedly until the dashes
are filled in.
The display presents the current MODE
3. Use the arrow keys (below display) to select the
desired MODE:
(*) Only available in installations with a Central Unit.
See NOTE on previous page.
4. Press "B" when the desired MODE comes up on the
display.
A333_ _
Current Mode:
Day
NIGHT
MIXED
DAY
MASTER-DAY (*)
MASTER-MIXED (*)
TRANSFER-DAY (*)
TRANSFER-MIXED (*)
Pag 11