Answer Call From Indoor Panel (Panel Decoder) - Fermax 94891EIc Manual De Instrucciones

Answer call from an indoor panel (panel decoder )
C P
NOTE: If there is more than one of the same type of call pending
an answer, from either telephone or panel, the system stores them
in the corresponding call queues. Management is explained in the
section: "CALL QUEUES ".
1. The visitor calls from the panel by pressing the
"CONCIERGE" key. The Guard Unit starts to "beep"
and the LED and icon blink.
Three digits on the display indicate the panel and
block number the call is made from.
Example: Call made from nº 2 in block nº 4.
D
04
2. To answer the call, pick up the handset and press
the Concierge-Panel Decoder button.
The display indicates PANEL-GUARD UNIT
communication.
[
04
3. If you want to open the door, press the Door Lock
key, while "PANEL-CONCIERGE communication"
appears on the display (If it does not appear, press the
Concierge-Panel Decoder button again)
4. To end communciation with the panel, press the
Hash button.
:01/01
002 18:15
]
002/ 01
Pag 23