Call Another Guard Unit - Fermax 94891EIc Manual De Instrucciones

Call another Guard Unit

Pag 26
1. Key in the number of the block or sector where the
Guard Unit is installed. Not necessary if it belongs to
the same block.
2. Enter code 9A.
3. Key in the number of the Guard Unit to be called.
Use two digits.
Example: If you are in Guard Unit nº 1 and wish to call
Guard Unit nº 3, key in "03".
4. Press the BELL key.
The Guard Unit called starts to "beep" and the display
indicates GUARD UNIT-GUARD UNIT communication.
[ ]
01/ 03