Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
12. Front Lower Control Rear Link Nut (1) » Install NEW nut.
Caution: Refer to Fastener Caution.
13. Front Lower Control Rear Link Bolt (2) » Tighten
Tighten
1. First Pass: 100 N·m (74 lb ft)
2. Final Pass: (90–105 degrees)
14. Inspect steering gear boot for damage. If any damage is noted, replace the steering gear boot.
15. Steering Knuckle Nut (1) » Install and tighten
Tighten
1. First Pass: 40 N·m (30 lb ft)
2. Final Pass: (120–135 degrees)
16. Front Compartment Side Noise Shield (4) » Install
17. Front Compartment Side Noise Shield Screw (1) » Install and tighten 2.5 N·m (22 lb in)
18. Front Compartment Side Noise Shield Bolt (3) » Install and tighten [3x] 9 N·m (80 lb in)
Camaro Suspension Kit
TITLE
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GM SPECIFICATIONS.
84242387
IR 23SE16
PART NO.
DATE
23SE16
Initial Release - Andrew Rogers
14
SHEET
REVISION
54
OF
AUTH
2546929
Publicidad
Tabla de contenido
