Performance 84242387 Manual De Instrucciones página 2

Camaro Suspension Kit Contents:
Component Name
Front Stabilizer Bar
LH Front Handling Link
RH Front Handling Link
Rear Stabilizer Bar
Nut - Front Handling Link
Bolt - Front Handling Link
Chevrolet Performance Emblem
Recommended Tools
• CH-42188-B Ball Joint Separator
• J-36660–A Torque Angle Meter
• Torque Wrench (10-150 ft-lbs)
Lifting and Jacking the Vehicle
Note: The use of a LOW PROFILE LIFT ARMS SYSTEM may be required to avoid unwanted contact with the vehicle's body
and structure depending on lifting equipment used. Refer to the manufacture's recommendation for their applications of low
profile lift arms system for their lifting equipment.
Danger: To avoid any vehicle damage, serious personal injury or death when major components are removed from the
vehicle and the vehicle is supported by a hoist, support the vehicle with jack stands at the opposite end from which the
components are being removed and strap the vehicle to the hoist.
Danger: To avoid any vehicle damage, serious personal injury or death, always use the jackstands to support the vehicle
when lifting the vehicle with a jack.
Camaro Suspension Kit
TITLE
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GM SPECIFICATIONS.
Quantity
1
1
1
1
2
2
1
84242387
IR 23SE16
PART NO.
DATE
23SE16 Initial Release - Andrew Rogers
2
SHEET
REVISION
54
OF
AUTH
2546929