Performance 84242387 Manual De Instrucciones página 16

Rear Stabilizer Shaft Replacement
Removal Procedure
1. Remove the rear tire and wheel assemblies.
Caution: Use care when removing or installing the stabilizer shaft as coating can be removed by contact with tools or other
vehicle components. Corrosion will occur and early stabilizer shaft failure will be the result.
Note: DO NOT allow the upper stabilizer shaft ball stud to rotate.
2. Using the proper size allenwrench, hold the upper stabilizer shaft ball stud.
3. Remove the upper stabilizer shaft link nut.
4. Remove the two rear exhaust muffler isolators.
5. Remove the wiring harness from the top left stabilizer shaft insulator clamp bolt.
Camaro Suspension Kit
TITLE
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GM SPECIFICATIONS.
84242387
IR 23SE16
PART NO.
DATE
23SE16 Initial Release - Andrew Rogers
16
SHEET
REVISION
54
OF
AUTH
2546929