Prepare Wall - Siemens LC479050UC Manual De Instalación

4) Prepare Wall

Figure 1: Prepare Ductwork
The hood must be mounted through the back wall. It cannot be mounted from
above. See General Information, page 2, for suggestions for determining hood
height.
Once the preferred height is determined, draw a line at the vertical centerline of
the cooking appliance.
Use the installation template to locate and mark the screw holes.
Drill 4 pilot holes for hood screws and 2 pilot holes for chimney screws. Install
plugs in screw holes so that they are flush with the wall.
Note: At least one screw must be installed through a stud.
Figure 2: Prepare Wall
chimney screw holes
upper hood screw holes
lower hood screw holes
transition
one way damper
centerline
30" min.
template
English 3