HELPFUL TOOLS
For safety and ease of installation, Moen
recommends the use of these helpful tools.
PARTS LIST
A
x2
B
x2
C
Confirm all parts are present
. Dry Wall Anchor (x2)
. Mounting Bracket
A
D
. Wood Screw (x2)
. Post
B
E
. Red Pin
. Washable Ink Stamp
F
C
DO NOT TOUCH
G. Hex Wrench
these items
unless needed
for removal.
1
⁵⁄₁₆"
⅟₁₆"
Stud Finder
H. Set Screw
One installed in each Post
1. PRESS & MARK
1
a
Gently remove the cover from the Ink Stamp (C).
D
E
1
b
E
F
Setup
Ensure the set screw hole is
facing downward.
Video Installation Guide: www.moen.com/pminstall
2. DRILL & MOUNT
3. SNAP TO WALL
Press & Mark
Press & Mark by pushing Post (E)
NOTE: If you wish to change
location, wipe the wall clean and
firmly and evenly against the wall.
Hold for a few seconds then set
re-mark.
product aside. You'll now see marks
showing you exactly where to drill.
C
2