Maintenance; Removal Of Gas Appliance - Maytag 8111P503-60 Manual De Usario

Maintenance

Removal of Gas Appliance

Gas appliance connectors used to connect this appliance to
the gas supply are not designed for continuous movement.
Once installed, DO NOT repeatedly move this gas appliance
for cleaning or to relocate. If this appliance has to be moved
and/or removed for servicing, follow the procedure described
in the installation instructions.
Conventional Surface Burners
Under no circumstances are the surface burner assemblies to
be taken apart for cleaning. The surface burner assembly can
be removed to clean the burner box area.
The two surface burner assemblies are secured in place
during transportation with screws. Once the cooktop is
installed, these screws may be removed to allow quick and
easy removal of the burner assemblies.
To remove:
Allow the burner assembly to cool. Lift up cooktop. Grasp the
burner assembly and rotate it slightly toward the left to
release the two tabs on the assembly. Then lift the assembly
and pull toward the back of the cooktop until the air shutter
ends on the assembly release from the valves.
To replace:
Insert the air shutter ends on the burner assembly over the
valves and lower the assembly into place. Be sure to secure
the two tabs on the burner assembly into the two slots on the
burner support bracket which is mounted to the burner
bottom.
Note:
If the tabs are not properly inserted into the slots, the
assembly may rock and the burners may not light properly.
7