Hoshizaki FM-170EE-HC Manual De Instalación página 2

WARNING
This icemaker uses HFC-free refrigerant
(propane) and HFC-free foam insulation that
are non-ozone-depleting and environmentally
sustainable materials having very low global
warming potential.
The HFC-free refrigerant is flammable and
sealed in the refrigeration system. Although
the refrigerant does not leak out under normal
usage, take utmost care when handling this
icemaker so as not to cause any damages to
the system. In the case of accidental damage
to the refrigeration system causing refrigerant
leak, do not create a source of ignition in the
area. Do not operate electrical switches or
plugs in the area, do not use naked flame.
Immediately ventilate the area by opening doors
and/or windows, and call service engineer.
IMPORTANT
1. I n o r d e r t o c a r r y o u t s a f e a n d p r o p e r
installation of the product, please read this
booklet carefully beforehand and follow the
instructions contained within.
2. On completion of the installation, start up
the icemaker to check for any abnormalities,
and instruct the user on how to use and
maintain the icemaker in accordance with
the Instruction Manual.
3. This booklet should be handed over to the
user after the installation and be preserved
by the user together with the Instruction
Manual for any further consultation that may
be necessary.
WARNING
T h e i n s t a l l a t i o n m u s t b e c a r r i e d o u t
b y q u a l i f i e d p e r s o n n e l , i n a c c o r d a n c e
with current regulations, according to the
manufacturer's instructions.
1. UNPACKING
WARNING
Children should not be allowed in reach of
the packaging elements (plastic bags and
expanded polystyrene) as they are potential
sources of danger.
CAUTION
1. Do not lift or manoeuvre the carton by using
the shipping bands.
2. R e m o v e s h i p p i n g c a r t o n , t a p e ( s ) a n d
packing. If packing material is left in the
icemaker, it will not work properly.
Front Panel
(Left)
Power Supply
Cord
1) After removing the packaging, make sure that
the icemaker is in good condition. If in doubt,
please do not use the equipment but apply to
professionally qualified personnel.
2) Remove the shipping tape holding the Door and
Front Panel.
3) Open the Door, take out the package containing
accessories, and check the contents:
a) Installation Kit
Inlet Hose
Outlet Hose
Adjustable Leg
b) Scoop
4) Remove the Front Panel (Left) and Top Panel.
See Fig. 2.
Front Panel
(Left)
Front Panel (Left): Remove the screws. Lift up and
pull toward you.
Top Panel: Remove the screws and lift up.
1
ENGLISH
Top Panel
Door
Front Cover
Air Filter
Fig. 1
1
1
4
1
Top Panel
Protective
Plastic Film
Adjustable Leg
Fig. 2