Ezviz A1 Guia De Inicio Rapido página 10

Ocultar thumbs Ver también para A1:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
Remote Control Basics
Emergency Button
At-Home Mode
Name
Description
LED Indicator
Flicker when any button is pressed.
Hold down the button for 2 s to send an emergency alarm to the EZVIZ platform.
If anyone stays at home or you are going to get into the house, you need to disarm the
alarm system. Press the button to activate the At-Home mode.
When you are at home and still want to feel protected: only the perimeter parts of the
house (doors and windows) are armed. The Sleeping mode is appropriate during the
day or sleeping time at night. Press the button to activate the Sleeping mode.
If no one stays at home, you need to activate the alarm system to protect it from
intruders. The Leaving-Home mode is appropriate. Press the button to activate the
Leaving-Home mode.
Press to turn off the voice prompts.
• The remote control in the package is connected to the A1 by default. Refer to the step 3 in the
Operation to connect another remote control to A1 if the remote control does not work normally
or you have a new one.
• The above descriptions for arming mode are the default settings. You can customize the
detectors arming status in each arming mode and switch the arming mode by EZVIZ app.
LED Indicator
Sleeping Mode
Leaving-Home Mode
Mute
6

Publicidad

Tabla de contenido
loading

Tabla de contenido