USE LIMITS
The actuator has been designed and manufactured exclusively for the destination of use given on page 4, therefore, any other type of use is strictly forbidden
in order to assure in any moment the safety of the installer and of the user, as well as the efficiency of the actuator itself.
IT IS STRICTLY FORBIDDEN TO USE THE ACTUATOR FOR IMPROPER USES OTHER THAN THE ONE FORESEEN BY THE MANUFACTURER
IT IS STRICTLY FORBIDDEN TO INSTALL THE ACTUATOR ON THE EXTERNAL SIDE OF THE WINDOW FRAME SUBJECT TO ATMOSPHERIC
AGENTS (RAIN, SNOW, ETC.).
STANDARD PACkAGE
Each standard package of the product (cardboard box) contains (Fig. 5):
•No.1
Actuator equipped with power supply cable;
•No.1
Window frame connection bracket (Ref. A);
•No.1
Bracket for bottom hung opening (Ref. B);
•No.1
Small parts package (quick coupling, No.2 bracket fastening lateral screws, No.7 screws AF Ø 4.2x19mm for fastening the bracket to the window
frame, No.2 screws AF Ø 4.2x19mm for fastening the quick coupling); 5mm Allen wrench (Ref. C)
•No.1
(2mm) Allen wrench; (Ref. D)
•No.1
Installation and use instructions.
MAkE SURE THAT THE ABOVE DESCRIBED COMPONENTS ARE CONTAINED IN THE PACkAGE, AS WELL AS THATTHE ACTUATOR HAS
NOT BEEN DAMAGED DURING TRANSPORT.
SHOULD ANY ANOMALY BE DETECTED, IT IS FORBIDDEN TO INSTALL THE ACTUATOR, AND IT IS COMPULSORY TO REQUIRE TECHNI-
CAL ASSISTANCE FROM YOUR DEALER OR THE MANUFACTURER.
EN
17