Craftsman 172.11810 Manual Del Operador página 4

_
I _ WARNING:
BE SURE to read and understand all instructions in this
manual before using this drflltdriver. Failure to follow all instructions may result
tn electric shock, fire and/or serious personal injury,
WORK AREA SAFETY
1_Keep your work area clean and well IlL Cluttered workbenches arid dark areas
invtte aecldenls,
2+ DO NOT operate power tools in explosive atmospheres, such as tn the presence
of flammable liquids, gases, or dust+ Power tools create sparks which may Ignite
the dust or fumes°
3. Keep bystanders, children and visitors away while operating a power tool,
Distractions can cause you to lose control+
4., Make your workshop chlldproof w+lh padlocks and master switches, Lock toots
away when not in use+
5- MAKE SURE the work area has ample lighting so you can see the work and that
there ere no obslructions thai will interfere with safe operation BEFORE using your
cordless drtll t driver.
PERSONAL SAFETY
_o KNOW your cordless drill/driver, Read the operalor's manual carefully Learn the tool's
appficalions and l+mftations, as well as the specific potenliat hazards related to this looL
2. STAY ALERT, watch what you are doing and use common sense when operating
a power tool
3. DO NOT use power tools while tired or under the influence of drugs, alcohol or
medication. A moment of inaltantion while operating power tools may resull in
serious personal injury
4, DRESS properly. DO NOT wear loose clothing or jewelry. Pult back fang hair, Keep
your hair, clothing, and gloves away from moving paris Loose clottliog, or long hair
can be caught in moving parts. Air vents often cover moving parts and should
also be avoided,,
5. AVOID ace+dental starting Be sure trigger switch is In the "Locked OFF" position
before inserting battery pack., DO NOT eamj tools with your finger on the trigger swtlch,,
Carrying tools with your finger on the trigger switch or Inserting the battery pack tn tools
that have the switch In the "FORWARD" OR "REVERSE" position Invttes accidents,
6+Do not overreach= Keep proper footing and balance at all times, Proper tooling
and balance enables better conlrol of the tool in unexpected situations,
7-ALWAYS SECURE YOUR WORK. Use clamps or a vise to hold work when practical,,
It Is safer than uslng your hand and frees both hands to operale too]
8+ USE SAFETY EQUIPMENT. Always wear eye protection, Dual mask, n0n, skid safely
shoes, hard hat, or hearing protection must be used tar appropriate conditions
9_ DO NOT USE ON A LADDER or unstable support. Stable footing on a sofid surface
enables belier control of the toot in unexpected situations.