Reversing Door - Electrolux EFME427UI Instrucciones De Instalación

NOTE
Door reversibility is available on all dryer models.
IMPORTANT
BEFORE YOU REVERSE YOUR DRYER
DOOR:
1. Be sure you have adequate swing area
before reversing door.
2. Gather your tools - including a screw
driver with a #2 square bit and plastic
knife (or small, flat prying tool that won't
damage paint).
3. Be sure dryer is unplugged from power
source!
WARNING
Failure to disconnect power source before servicing could result in personal injury or
even death.
Removing Latch and Hole Plugs
1. Open the door.
2. Remove plastic hole plugs and save to
reinstall later. You may have to use a
non-scratching plastic knife if you are
unable to dislodge the plugs manually.
ELECTRICAL SHOCK HAZARD
3. Remove both screws from door latch.
x2

Reversing Door

Tools needed for reversal:
Plastic knife
Save latch and screws for reinstallation
later.
x2
19
Screwdriver
with #2
square bit