Operating The Device; Parameters On The Device; Configuring Microphones On The - Harman AKG DMM14 U Manual Del Usuario

operAting the Device

SYSTEM
CONTROL
DMM14 MANUAL
8 Operating the device
8.1 SYSTEM CONTROL: Changing parameters on the device
To change the parameters on the device, proceed as follows:
Step Description
Turn to the required function on the SYSTEM CONTROL
1
rotary knob, turning the rotary knob until the LED is lit at the
required function.
Modify the inputs with the selected function using the IN 1 to
2
IN 12 rotary knobs
Modify the outputs with the selected function using the OUT 1
3
and OUT 2 rotary knobs
The stereo record output does not have any setting options.
5 minutes after the last change, the SYSTEM CONTROL rotary knob goes
back to the LEVEL mode. 1 minute after the last change, the set value is
saved automatically.
8.2 Configuring microphones on the DMM14 U (UL, ULD)
To configure the connected microphones and accessories, proceed as
follows:
115