Connect To The Mains Power Supply - Harman AKG DMM14 U Manual Del Usuario

instALLAtion AnD connection
DMM14 MANUAL
Connect the microphones and accessories to the rear of the
DMM14 U (UL, ULD) as follows:
Step Description
1 Connect microphones and other signal sources (e.g. receivers
for wireless microphones) to the IN inputs
Connect outputs OUT 1/L, OUT 2/L and OUT 1/R , OUT 2/R
2
to a mixing desk or amplifier
Connect the RCA jacks on the stereo recording output REC
3
(OUT) to a recording device
6.4

Connect to the mains power supply

Caution: Risk of damage
Do not connect the unit to the power network until you have established all
the audio connections!
Ensure that the input voltage on the DMM14 U (UL, ULD) corresponds to the
mains voltage.
To connect the device to the mains, proceed as follows:
Step Description
1 Connect the mains power supply cable to the appropriate
socket on the rear panel of the DMM14 U (UL, ULD)
2 Plug the power supply cable into a mains socket
90