Copying Configuration Data; Copying Individual Values - Harman AKG DMM14 U Manual Del Usuario

operAting the Device
Copy
configurations
DMM14 MANUAL
Step Description
1 Lock the complete unit, to do this press the
SYSTEM CONTROL rotary knob at the same time as the OUT
rotary knob for longer than 3 seconds
•
•
•
•
2 Remove the lock on all channels by pressing the rotary knob
for the required channels for longer than 3 seconds.
The status conditions that were set before the channels or the complete unit
was locked, are retained even after the DMM14 U (UL, ULD) is switched of
and back on!
8.12

Copying configuration data

The copy function can be used to copy individual or multiple settings
(LEVEL, TREBLE, BASS, LOWCUT, LIMITER and COMPRESSOR) on an
input to one or more other inputs.

8.12.1 Copying individual values

To copy individual values from one channel to one or more other channels,
proceed as follows:
Step Description
Select the required function on the SYSTEM CONTROL rotary
1
knob
2 Press the rotary knob with the value to be copied, then
straight away press the rotary knob up to which the copy
process is to be carried out
The LOCKED LED is lit.
The original settings are stored.
Turning the rotary knob has no function.
All other rotary knobs are in LEVEL mode and can still be
operated.
124