Test/Disablement Functions (Access Level 2); Lamp Test - Notifier EN54 Manual De Usuario

EN54 2-8 Zone Conventional Fire Panel - User Manual
5 FAULT - Flashing Yellow LED Indication - What do you do?
6

TEST/DISABLEMENT Functions (Access Level 2) -

Steady Yellow LED Indication
Caution: If the System Fault LED is lit steadily your building may not
have fire protection - contact service engineer immediately!
Insert key and turn 90° clockwise for Level 2 access.
6.1

Lamp Test

1
2, 3
997-493-002-2, Issue 2
Status:
Action/Result:
Press
buzzer
continues flashing.
Investigate cause of
fault - contact service
engineer.
1 Insert and turn key
90° clockwise to enable
access Level 2 controls.
2 Press and hold
following LEDs illuminate:
buzzer
3 Release
LEDs
and silence the buzzer
4 Turn key
clockwise: returns you to
access Level 1.
4
- Flashing
- Intermittent tone
to mute
; LED
: the
, and . The
activates.
to extinguish
, and
.
90°anti-