Philips HR1843 Manual De Instrucciones página 7

Cleaning the blender
- Assemble the blender jar properly (see section
on preparation of the blender). Pour lukewarm
water and some washing-up liquid into the
blender jar. Assemble the lid and the stopper.
- Press the Quick Clean button a number of times
to clean the jar quickly.
- Unplug the appliance.
- Remove the lid, the stopper, the blender jar and
the knife unit and rinse them with clean, hot
water.
- If you want to clean the blender more
thoroughly, remove the knife unit and clean all
parts separately. Be careful with the sharp
edges of the knife unit!
Cleaning the juice extractor
- Switch off and remove the mains plug from the
wall socket before cleaning.
- Remove the lid, the pulp container and the
sieve. Rinse them immediately after use.
- You can use the brush to clean the sieve.
7