KPS MT60 Manual De Funcionamiento Manual De Funcionamiento página 22

• For manual measuring range, when the value to be measured is unknown,
select the highest measuring range.
• Before rotating conversion switch to change measuring function, remove
probe from the circuit to be measured.
• Don't measure resistors, capacitors, diodes and circuits connected with
power.
• During tests of current, resistors, capacitors, diodes and circuit connections,
avoid connecting the meter with voltage sources.
• Do not measure capacitance before capacitor is discharged completely.
• Do not use the meter in explosive gas, vapor or dusty environments.
• If you find any abnormal phenomena or failure on the meter, stop using it
imeediately.
• Do not use the meter unless the bottom case and the battery cover are com-
pletely fastened in their original places
• Don't store or use the meter in direct sunlight or high temperature and high
humidity conditions.
1.3 Symbols:
Note (Important safety information. Refer to the operation
manual)
Can be used for dangerous electric conductor.
Double insulation protection (class II)
According to pulse voltage tolerance protection level provided
CAT IV by IEC 61010-1 standard overvoltage (installation) level III and
pollution degree 2.
The meter complies with EU standard
Grounding
KPS-MT60 • Digital multimeter
22