KPS MT60 Manual De Funcionamiento Manual De Funcionamiento página 26

MAX Maximum measurement state
MIN Minimum measurement state
Automatic power-off state
Low battery
% Percentage (duty ratio)
Hz, kHz Hertz, Kilohertz (frequency)
mV, V Millivolt, Volt (voltage)
μA, mA, A Ampere (current)
nF, μF, mF Microfarad, Millifarad (capacitance)
Ω, kΩ, MΩ Ohm, Kilohm, Megohm (resistance)
REL Relative measurement mode
NCV Non-contact voltage induction mode
USB communication mode
3. SPECIFICATIONS
The meter should be recalibrated annually. When calibrating, temperature
should be 18°C~28°C and relative humidity should be less than 75%.
3.1 General
• Automatic measuring range and manual measuring range
• Full measuring range overload protection
• The maximum allowable voltage between measurement end and ground:
600V DC or AC (RMS)
• Operational height: maximum 2000 m
KPS-MT60 • Digital multimeter
26