General Information Prior To Installation; Description And Function; Electronic Assembly Layout; Insulation Test - Wittur Eco BUS Manual De Instrucciones

9 - GENERAL INFORMATION PRIOR TO INSTALLATION

9.1 DESCRIPTION AND FUNCTION

ECO door drives are used for low and mid duty elevators. The Drive can move panel masses up to 130kg
complete door package weight.

10. ELECTRONIC ASSEMBLY LAYOUT

X5
X3
X8 X16
Plug description:
X1 - Inputs
X2 - Outputs
X3 - Transformer secondary winding
X4 - Motor
X5 - Battery supply
X8 - RS485 interface for WPT (Wittur Programming

10.1 INSULATION TEST

Caution: Before carrying out tests on system's insulation, connector X5 must be disconnected.
Sujeto a cambios sin previo aviso
X10 X4 X40
X15 X12 X1
EXCELLENCE IN COMPONENTS
LEARN BUTTON
STATE LED
Tool)
X10 - Motor encoder
X12 - Reference switch
X15 - Photo Cell (Curtain of light) Receiver
X16 - Photo Cell (Curtain of light) Transmitter
X40 - Test drive buttons
X60 - Extension plug
3411.32.0100 ed.0
Pag.13.78
X2
Subject to change without notice!
GB
X60