Foreword And Warnings - Wittur Eco BUS Manual De Instrucciones

3411.32.0100 ed.0
GB
Pag.2.78
Congratulations on choosing a WITTUR product!
Before starting the installation of this product, read the information contained in this document.
You will find important warnings on how to assemble and maintain your WITTUR product in good
operating conditions and to get the maximum of your investment.
You will also find important information concerning the product care and maintenance which are an
important factor to ensure safety at all times.
WITTUR has long been involved in research aimed at reducing noise level and in design that takes into
due consideration the product quality and the conservation of environment.
This document is an integral part of the supply and must be available in the lift power room at all
times.
All products are provided with identification type label and in case with certification marks in accor-
dance with the current rules.
In case of need concerning the product, the identification data on the label must be always commu-
nicated to us.
We hope you will get full satisfaction from this WITTUR product. Yours faithfully.
WARNINGS
- WITTUR will not be held liable for any damage caused by tampering of the packing material by
thirds.
- Before starting assembly, check that the product received corresponds to the order and to the pack-
ing list and that no damage has occurred in transit.
- Within its policy of continual research, WITTUR reserves to make changes to its products without
notice. The figures, descriptions and data contained in this manual are intended as purely indicative
and not binding.
- To ensure the safety of the product, avoid any alteration or tampering.
- WITTUR liability will be limited to the original components only.
- WITTUR product is intended for use in the lift sector only, therefore WITTUR liability shall be lim-
ited to such use.
- This product is intended for professional use. Any improper use, including for hobby or DIY, is pro-
hibited.
- In order to prevent any injury to persons and damage to property, the handling, installation, adjust-
ment and maintenance must be carried out by suitably trained personnel, using appropriate cloth-
ing and equipment.
- Any masonry work connected with the correct installation of the product must be executed in a
workmanlike manner according to the applicable laws.
- The connection of the electric/electronic units to the local power supply must be executed in a
workmanlike manner according to the applicable laws.
- All metal parts supporting the electric/electronic units must be connected to an earth system in a
workmanlike manner according to the applicable laws.
- Before connecting the product to the power supply check that the product's requirement corre-
sponds with the power supply available.
- Before starting any work on the electric/electronic components disconnect power from the system.
Sujeto a cambios sin previo aviso

FOREWORD AND WARNINGS

EXCELLENCE IN COMPONENTS
WITTUR
Subject to change without notice!