Installation On Your Bike; Installing The Device - Pioneer SGX-CA500 Guia De Inicio Rapido

Installation on Your Bike

EN
Mount the Cyclocomputer on your bike.
Caution
• When you mount the Cyclocomputer on your bike, be sure your bike is in a stable
position to prevent it from falling.

Installing the Device

1
Remove the bolt from the bracket.
Remove the bolt from the bracket
using a 3 mm hex wrench.
hex wrench
• Be careful not to lose the removed bolt.
10
2
Mount the bracket on the handlebar
of your bike.
• Be careful not to pinch your finger
when mounting the bracket on the bike.