Saving Log Data; Backing Up Log Data To A Pc - Pioneer SGX-CA500 Guia De Inicio Rapido

EN
Workout

Saving Log Data

After you have completed your workout,
reset the timer to save the log data to
the built-in flash memory.
1
Press the [LAP] button for more
than 2 seconds.
The log data is saved, and the timer is
reset.
The log data is saved in the "\Pioneer\
Log" folder.
• Log data is not saved to the built-in
flash memory until the timer is reset.

Backing up Log Data to a PC

You can transfer the log data in the built-
in flash memory of the device to your PC.
Transferred data can be analyzed using
the Pioneer™ Cyclo-Sphere web service.
The log data can be uploaded directly to
the Cyclo-Sphere via Wi-Fi. Refer to the
User's Guide for details.
Wi-Fi Certified and the logo are
trademarks or registered trademarks of
the Wi-Fi Alliance.
20
1
Connect the device to your PC
with the provided USB cable.
The PC recognizes the device as a
mass storage device.
• Refer to page 7 about connecting the
device and your PC.
2
Select the data you want to
transfer, and then save it
anywhere on the PC.
The log data is saved in the "\Pioneer\
Log" folder.
Save it anywhere on the PC.
The file name is the date and hour that
the training log started.
(e.g., LOG_2013_04_01_08_20.db)