Care, Maintenance, And Storage; Removing The Battery - Pioneer SGX-CA500 Guia De Inicio Rapido

Care, Maintenance, and Storage

EN
Make sure that the power of the device
is turned off before cleaning.
• Use a commercial cleaning cloth to
clean the display.
• Use a soft dry cloth or a cloth that
has been dampened and wrung out
to wipe the device or the bracket.
• Do not use benzene, paint thinner, or
other volatile chemicals, cleansers,
or chemically treated cloths. Doing
so could damage the product or
cause the paint to peel.
• Discharge the battery and store
the device in a cool and dark place
if being stored for a long period of
time.
26

Removing the Battery

Remove the lithium-ion battery by the
following procedures before disposing
of the device.
• Please use caution when removing
the battery. Please never attempt to
disassemble the device except when
you dispose of the battery.
1
Remove the screw of the USB
connector cover.
• Please be careful not to damage
a groove on the screw head when
removing the screws of the USB
connector cover.
2
Remove the screw of the device.
Use a Phillips-head screwdriver and
remove the screws (4) from the back of
the device.