Pairing The Sensors - Pioneer SGX-CA500 Guia De Inicio Rapido

2
Tap [Date & Time] and set the
date and the time.
Press and hold the [MENU] button
after you've completed your settings.
Time Zone Select a time zone.
Date Enter the date.
Time Enter the time.
24-Hour Check the box to display time
Format in 24 hour format.
Date Select the date format.
Format
3
Tap [Close].
The Initial Setup is finished and
CycloMeter starts.

Pairing the Sensors

Pair the SGY-PM910H/PM900H
Pedaling Monitor Sensor or other ANT+
sensors to the device.
Before pairing the sensors
• Make sure that the sensors that you
want to pair are activated.
• If more than one sensor is activated,
bring the device close to the sensor
or specify the device number to pair.
Refer to the User's Guide for
information about how to specify the
device number.
• If you use the speed sensor
sold separately and the wheel
circumference is different from the
default, set the wheel circumference.
The wheel circumference is set to
2096 mm by default. For details,
refer to the Users Guide.
EN
Basic Operation
17