Pioneer SGX-CA500 Guia De Inicio Rapido página 18

EN
Basic Operation
1
Mount the sensors on your bike.
For details about how to mount sensors,
refer to the user's manual of your
sensors.
2
Press the [MENU] button on the
main screen of the CycloMeter.
3
Tap [Sensors] - [Connect New].
4
Enter your sensors' information.
Tap [Device Type] to select the type of
sensor(s) you wish to pair.
Types of compatible sensors:
• SpeedSensor
• CadenceSensor
• Speed & Cadence Sensor
• Heart Rate Monitor
• PowerMeter
• Pedaling Monitor L
• Pedaling Monitor R
5
Tap [Search].
The message "Searching Please wait."
appears. If the sensors are paired,
the information from the sensors is
displayed.
18
6
Confirm the information from
the sensors.
Confirm that "OK" is displayed in the
[Error Rate] area.
• If "Processing..." is displayed in
the [Error Rate] area, the sensor
information is not received properly
due to a communication error. Make
sure that the sensor is activated,
bring the device closer to the sensor
and try pairing again.
• Pairing with the sensor may not
be possible due to the influence
of the 2.4 GHz frequency band. If
"Processing..." is displayed even
if the device is moved closer to
the sensor and paired with it, try
again someplace where there is no
interference from microwaves, radio
waves, or wireless equipment.