Troubleshooting; Need Help - Lorex Baby SWEET PEEK MINI Manual Del Usuario

Troubleshooting

Problem
No video displayed
on the monitor
Monitor screen keeps
turning off
The camera is not
detected; "Out of
Range" is shown on
the monitor
Feedback / squealing
noise coming from the
monitor

Need Help?

Product Support is available 24/7 including product
information, user guides, quick start guides, and FAQ's
at www.lorexbaby.com/support
Solution
• Press and hold the
button to power on the
monitor.
• Monitor is out of batteries.
Plug in the monitor power
adapter.
• Video Off or VOX mode is
on. Press any button to turn
the screen back on.
• VOX mode is on. See
"Enabling VOX Mode (Voice
Trigger)" on page 12 for
details on disabling VOX
mode.
• The monitor battery is low.
Plug in the monitor power
adapter
• Wrong channel selected.
To change the channel, see
"Changing Channels" on
page 10.
• Make sure the camera is
powered on.
• The camera and monitor
may be out of range. Extend
the antennas on the monitor
or move the monitor and
camera closer together.
• For optimal performance,
avoid placing the
monitor and camera near
televisions, computers,
cordless/mobile phones, or
other electrical equipment.
• You may need to pair the
camera and the monitor
again. See "Pairing
Additional Cameras" on
page 13 for details.
• Your camera and monitor
may be too close to each
other. Move them further
apart.
• Press to lower the
monitor volume.
17