Automatic Feeder Cleaning; Cleaning The Inside Of The Main Unit - Canon imagePRESS C910 Guía Breve

▀

Automatic Feeder Cleaning

If originals which are fed from the feeder become dirty, follow the procedure below.
1
Place 10 sheets of blank paper into the feeder.
• Use A4 plain paper.
2
Press .
3
Press [Adjustment/Maintenance]  [Maintenance]  [Clean Feeder].
4
Press [Start].
▀

Cleaning the Inside of the Main Unit

If output paper becomes dirty, follow the procedure below.
1
Press .
2
Press [Adjustment/Maintenance]  [Maintenance]  [Clean Inside Main Unit].
3
Press [Start].
NOTE
• Similarly perform [Adjustment/Maintenance]  [Maintenance]  [Clean Wire] and [Adjustment/Maintenance] 
[Maintenance]  [Clean Roller].
• Paper may be cleaned by performing [Adjustment/Maintenance]  [Maintenance]  [Clean Belt]. After loading
three or more sheets of plain paper into the upper paper drawer of the main unit, perform the above procedure.
Cleaning and Maintenance
21