Loading Split Silverware Basket:
Your dishwasher
hasaremovable
split b asket with two compartments
that c anbe
separated
togive
you loading flexibility in order to accommodate flatware and
lower rack capacity needs. Thisoption savesspace when only half the unit is
needed. Simply remove the basketfrom the
dishwasher to load silverware and place it
back once you finish loading.
Steps to Split the Silverware
Basket
1) Put your right hand in right side of the
basket and your left hand in the left side
.,_,,,,,,,,,_
of the basket.
"-'
1_
2) Simply slide the basket with light force to
unlock/split by pushing it forward and
pulling it towards you until you see that
both hookscome out of the elongated holes in the middle.
Note:
Do not use heavy force to splitthe basket because this may cause
damage to plastichooks to break off.
3) To put both halves together again, use both hands to level the split basketsand
sliding each hook into each elongated hole on both sides. Now, slide with light
force to attach/lock by pushing it forward and pulling it towards you until both
basketssnaps in easily.
• To avoid any type of injury, load knives and forks face down.
• Try to mix spoons, knives and forks for better cleaning and drying and to prevent
nesting.
• Do not mix stainless steel and silver items because you may damage the silver
finish on silver items.
Do not load tall items next to the upper spray arm because it
may block the rotation.
Do not load tin, pewter and non-dishware filters. These items
are not considered dishwasher safe.
17