Pulse Mode; Accessory Jar (Model Ksb755); Ingredient Cup; Drizzle Cap (Model Ksb755) - KitchenAid KSB655 Manual De Instrucciones

4. To turn off the CRUSh ICE feature
press OFF. The Blender is now ready for
continuous operation.
5. Before removing the pitcher or accessory
jar assembly, unplug the power cord.
PuLsE MoDE
Your KitchenAid Blender offers PULSE
®
MODE, which allows a "Pulse-at-any
Speed" feature.
NotE: PULSE MODE will not work with
the CRUSh ICE feature.
1. Before operating the Blender, make sure
the pitcher or accessory jar assembly is
properly positioned on the Blender base.
NotE: If a gap exists between the locking
collar and the base, the pitcher or accessory
jar might not be locked into the locking
collar or the collar is not positioned properly
on the Blender base. See Blender Assembly
on page 8 for further instructions.
2. Put ingredients into the pitcher or
accessory jar. To attach pitcher lid, push
firmly into place. To attach the accessory
jar lid, twist to lock onto the accessory jar.
3. Press PULSE MODE. The indicator light on
the button will blink to indicate that all
five speeds are in the PULSE MODE.
4. Select a speed button. Press and hold
for the desired length of time. Both
the speed button and PULSE MODE
indicators will stay lit when pulsing
at the selected speed. When button
is released, the blending will stop,
but the Blender will remain in PULSE
MODE and the PULSE MODE indicator
will return to blinking. To pulse again
or at another speed, simply press and
hold the button of the desired speed.
5. To turn off the PULSE MODE feature,
press OFF. The Blender is now ready for
continuous operation.
6. Before removing the pitcher or accessory
jar assembly, unplug the power cord.
using the Blender
Accessory Jar
(Model KsB755)
The accessory jar is
ideal for blending
salad dressings,
fresh mayonnaise,
salsa or pesto,
and just the right
size for single
serving shakes
or smoothies. Or
use to chop fresh
herbs or nuts while
preparing recipes.
Ingredient cup
The 2 oz. (60 ml)
ingredient cup can be
used to measure and
add ingredients to
both the pitcher and
the accessory jar. Remove cup and add
ingredients at STIR, ChOP or MIx speeds.
When operating at higher speeds, with a
full pitcher or with hot contents, stop the
Blender and then add ingredients.
Drizzle cap (Model KsB755)
This versatile cap fits
into both the pitcher
and accessory jar lid and
is used to drizzle oils or
other liquids while the
blender is in operation.
soft start
The Soft Start
automatically starts the Blender at a slower
speed to pull ingredients into the blade
then quickly increases to selected speed
setting for optimal performance.
NotE: The Soft Start
only works when a speed is selected from
the OFF mode and does not work with the
PULSE MODE or CRUSh ICE features.
11
Blending feature
®
blending feature
®
blending feature
®