Maintenance Table - DUO-FAST DF225C Manual De Instrucciones

MAINTENANCE - Continued
ACTION
Drain air line filter(daily).
Keep lubricator filled.
Clean filter element-then blow
air through filter in direction
opposite to normal flow.
Check that all screws on tool
are tight.
Keep work contacting element
working properly.
Keep magazine and feeder
mechanism clean.
Lubricate "O" rings that are
replaced.
Use only Duo-Fast replacement
parts.
Check the driver blade regularly
and replace when worn.
Disconnect the tool when performing
repairs or clearing jams.

MAINTENANCE TABLE

Prevent accumulation of
moisture and dirt.
Keep tool lubricated.
Prevent clogging of filter with
dirt.
Prevent air leakage and pro-
mote efficient operation.
Promote operator safety and
efficient tool operation.
Prevent jamming of fasteners.
Assure long life and proper
operation of tool.
® Keep tool operating efficiently
and maintain Duo-Fast tool
warranty.
Ensure proper operation of the
tool.
CAUTION
WHY
®
13
HOW
Open manual petcock (most
air supply systems have such
a valve).
Fill with pneumatic tool
lubricant. Part No. 403720.
Wash with soap and water or
follow manufacturers instruc -
tions.
Check screws daily.
Blow clean daily.
Blow clean daily.
Use Chemplex grease, Part
®
No. 403734.
Order any repacement parts
needed from Duo-Fast Dealer.
Remove piston and driver
assembly from tool and com-
pare with new driver blade.
Replace when worn.
®