Tool And Fastener Specifications - DUO-FAST DF225C Manual De Instrucciones

TOOL AND FASTENER SPECIFICATIONS

TOOL SPECIFICATIONS
MODEL NO.
HEIGHT
WIDTH
LENGTH
WEIGHT
OPERATING PRESSURE
MAGAZINE TYPE
FASTENER SPECIFICATIONS
NAIL LENGTH
SHANK DIAMETER
NAIL COATINGS
TOOL AIR FITTINGS
This tool uses a 1/4" N.P.T. male plug. The fitting must be capable of discharging
tool air pressure when disconnected from the air supply.
OPERATING AIR PRESSURE:
80 to120 psi (5.5 to 8.3 bar). Select the operating air pressure within this range
for best tool performance.
DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE.
DF225C (Part# 502950)
12 5/8"
5 3/4"
11"
4 lbs. 5 oz.
80 to 120 psi (5.5 to 8.3 bar)
0 Degree, Plastic Coil
1 1/4" - 2 1/2"
.080 -.105"
Electro-Galvanized, Aluminum,
Hot Dipped Galvanized, Stainless Steel
:
3