To save the selected configuration in the SCS kit, follow these instructions:
•
switch off the board
•
press both the ON and
until you hear a double low-pitched tone
•
select the chosen configuration
•
press the button: enter by Bluetooth®
•
then select your helmet from the Bluetooth® devices detected
•
press the enter button
The first time you do the operation, the computer asks for the Bluetooth® PIN
which by default is 0000.
When you hear the switch-off music, this confirms that the configuration has
been completed whilst a double low-pitched tone warns of an error. In both
cases the helmet is switched off automatically.
94
buttons simultaneously for 5 seconds and