Wireless Remote Controller; Display Panel - Hisense AUV-18UR4SZA1 Instrucciones De Uso E Instalación

Optional remote control
You can control the air-conditioner with the wire remote controller and wireless remote controller.
SET TEMP
ROOM TEMP
C
AUTO
NO .
A
TIMER ON
TIMER OFF SET TIMER
Wire Remote Controller
It is used for controlling power ON/OFF,
setting the running mode, temperature,
fan speed and other functions.
Note : The remote controller picked with indoor unit, please refer to the packing list .
If you need others, you may purchase it.
Remote Controller(RC) instruction
Operation instruction will be further specified in
Please read it carefully before using this appliance and keep this manual for future reference.

Display Panel

Defrost indicator ( Green )
It lights on during the defrost.
It lights off when defrost
finishes.
Signal receiving section
Receives signal from the
remote controller.
The figures in this manual are based on the external view of a standard model.
Consequently, the shape may differ from that of the air conditioner you have selected.
Composition of the Air-conditioner
确 定
It is used for controlling wire remote controller,
setting the running mode, temperature, fan
speed and other functions.
remote controller's manual separately.
Filter clean (
It lights on when the filter
should be cleaned.
Run indicator (
It lights on during operation.
It lights off all when setting
SLEEP mode.
4
ON ON
OFF OFF
ON/OFF
MODE FAN
SWING SLEEP SUPER
SMART
IFEEL DIMMER
TIMER ON TIMER OFF CLOCK
SWING

Wireless Remote Controller

Yellow )
Red )
ON
OFF
SMART MODE
ON
OFF
TEMP.
SUPER FAN SPEED
TEMP.
FAN
MODE
FEEL SLEEP
CLOCK TIMER ON TIMER OFF
QUIET DIMMER ECONOMY
Timer indicator ( Green )
It lights on when timer is in
use.It lights off when timer
finishes.
Emergency switch
The filter clean is reset if press
the switch.
Press it the appliance will be stopped
when the unit is runing;
Press it for 5s,the appliance will be
forced colling when the unit is OFF.