Using The Remote Control - Hisense 12K BTU Instrucciones De Instalacion Y Uso

Timer Sleep Filt r e
1. The LED light on
control panel
Timer Sleep Filter Timer Sleep Filter
2. The function introduction see "using the remote control".
NOTE: Remote control may differ i n appearance.
NOTE:
When the first use,please remove the insulated
■
plastic patch.
One CR2025 battery (included) powers the
■
remote control. Replace battery after
6 months of use, or when the remote
control starts to lose power.
■
Please ensure the correct direction
for polar i ty of the cell same as the
in d i cator on the bracket.
■
Disposal of battery old batteries must be removed and
disposed of in accordance with current legislation as they
are harmful to the environment.
Power
Press power button to turn on/off air conditioner.
for Timer、Sleep、Filter.

Using the Remote Control

A
Bracket
A.
WIFI
WIF I control is ava il able for connected mode l s w i th th i s
l ogo on control panel.
CONNECT
1. Press the CONNECT button for 5s,the LED starts to flash.
2. After the WIFI module connecting the router,the LED
keeps on.Or the LED keeps off.
NOTE: WIFI control is available only for WIFI control models.
Fan
Press FAN to select High, Med, Low.
NOTE:
,
In Dry mode Fan speed cannot be set.
Mo e d
Press MODE to select
T emperature
Press the plus UP
■
time you press or hold the plus
temperature will go up 1°F (1°C) until it reaches 86°F (30°C).
Press the minus DOWN (
■
Each time you press or hold the DOWN (
temperature will go down 1°F (1°C) until it reaches 61°F (16°C).
DIMMER
Press the DIMMER button to turn off the control panel display.
NOTE:
When in DIMMER mode, new control inputs will return display
to normal.
12
Fan, Dry, Cool, ECO.
∧
( )
button to raise the temperature. Each
∧
UP ( )
button, the
∨
) button to lower the temperature.
∨
) button, the