Setting The Time Zone - Grundig G6 AVIATOR Guía De Funcionadmiento

DELETING THE CONTENTS OF ALL
MEMORY PAGES
1. Turn the G6 off.
2. Do a long press on the numeric keypad numbers 0, 9 and 0. RST
appears in the display.
3. Press the RESET button with a paper clip.
LABELING MEMORY PAGES
Memory pages can be uniquely labeled with four, intermixed digits
or letters.
1. With the G6 turned on, select memory mode with the PAGE/
TIME button. MEMO appears in the display.
2. Use the AUTO
3. Press the EDIT button until '_' appears, blinking in the display
(about 3 seconds).
4. Use the tuning knob to select the desired number, letter, quota-
tion mark or symbol.
5. Press the PAGE/TIME button to select the next '_'.
6. Repeat until 4 letters/numbers are selected.
7. Press PAGE/TIME when finished.

SETTING THE TIME ZONE

(Use this same procedure to change your time zone when
traveling).
1. With the G6 turned off, press the numeric keypad #8 button
until you see a time zone abbreviation in the display and 'Tzone'
appears on the left side.
2. Do quick, sequential presses on the 8 button, or use the tuning
knob to tune to different time zones (see the chart below).
3. Press the PAGE/TIME button once you've selected your time zone
or wait about 8 seconds and it will enter itself.
buttons to select the desired memory page.
G6 AVIATOR OWNER'S MANUAL
1