Using The Light - Grundig G6 AVIATOR Guía De Funcionadmiento

ACTIVATING AND DEACTIVATING THE ALARMS
For an alarm to turn on the radio, it must be activated. To activate
the alarm to be used, turn off the G6 and press the appropriate
alarm button, #1-3. Note the alarm symbol above the button. This
causes the alarm activation symbol to appear in the display, activat-
ing the selected alarm. To deactivate the alarm, press the appropri-
ate #1-3 button, causing the alarm activation symbol to disappear
from the display.

USING THE LIGHT

The light illuminates the display.
Normal Mode: Pressing any button activates the light. The light
automatically turns off after 5 seconds.
Manual Light-On/Off Mode: If the light is off, pressing the LIGHT
button activates the light for 5 seconds. Pressing it again within 5
seconds turns the light off.
Always-On Mode: When powered by its AC adapter and the light
button is pressed, the light remains on when the G6 is turned on.
EXTERNAL ANTENNA SOCKET
The external antenna socket is used to connect the G6 to advanced
performance shortwave antennas using a 50 or 75-Ohm coaxial
cable feed-line or to a long wire antenna. When using a 50 to 75
Ohm feedline, it may be necessary to attenuate the signal using an
antenna tuner or other method.
16
G6 AVIATOR OWNER'S MANUAL