Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
The progress bar will disappear when the calibration process is
complete.
Using the Correction Sensor
The correction sensor option is intended to be used with the
omniTRAX™ Patient Tracker.
You may use of the following options as needed:
•
Sensor Off
will not provide any corrections
•
Breathing Trace
after a detection period (if the omniTRAX™ is correctly connected,
configured and well positioned on the patient)
It allows to monitor the patient breathing and ensure the breathing level
is the same as the one used during the CT or MR acquisition.
• Movement
Correction
a function of patient's movement (if the omniTRAX™ is correctly
connected, configured and well positioned on the patient)
• Movement
Detection
motion is detected (if the omniTRAX™ is correctly connected,
configured and well positioned on the patient)
Aixplorer® Fusion/Navigation User's Guide
will display the breathing curve of the patient
will automatically correct the referential as
will display a pop-up message if a patient
71
Publicidad
Tabla de contenido
