Chicago Pneumatic CP 0044 Instrucciones De Seguridad Y De Funcionamiento página 9

CP 0044
WARNING Slipping, tripping and
falling hazards
There is a risk of slipping or tripping or falling, for
example tripping on the hoses or on other objects.
Slipping or tripping or falling can cause injury. To
reduce this risk:
► Always make sure that no hose or other object is
in your way or in any other person's way.
Always make sure you are in a stable position with
►
your feet as far apart as your shoulders width and
keeping a balanced body weight.
WARNING Motion hazards
When using the machine to perform work-related
activities, you may experience discomfort in the
hands, arms, shoulders, neck, or other parts of the
body.
Adopt a comfortable posture while maintaining
►
secure footing and avoiding awkward
off-balanced postures.
Changing posture during extended tasks may
►
help avoid discomfort and fatigue.
In case of persistent or recurring symptoms,
►
consult a qualified health professional.
WARNING Material hazard
During operation, the material that you operate in
can become hot and fall down, which can cause a
fire or even an explosion. This can cause personal
injury or death.
Always consider the direction of the falling object.
►
Wear fire resistant clothing and have fire fighting
►
equipment nearby.
WARNING Trapping hazard
There is a risk of neck ware, hair, gloves and clothes
getting dragged into or caught by a rotating cutting
blade. This can cause choking, scalping, lacerations
or death. To reduce the risk:
Never grab or touch a rotating cutting blade.
►
► Avoid wearing clothing, neck ware or gloves that
can get caught.
Cover long hair with a hair net.
►
WARNING Grinding hazard
Using the side of the cutting blade can cause it to
jam or break. Pressure from the side can damage the
cutting blade. This can cause personal injury.
► Never grind by using the side of the cutting blade.
Never use the cutting blade if it has been
►
damaged.
Never exceed the maximum speed for the blade.
►
9800 0543 90 | Original instructions
www.CrowderSupply.com • Toll Free: 888-883-5144
Safety and operating instructions
► Always feed the machine down in line with the
cutting blade.
Only use the cutting section of the cutting blade.
►
Never push the machine sideways.
►
WARNING Pressurized oiler hazard
If the oil regulating screw is loosened without
pressing the vent button to vent out pressurized air,
there is a risk of personal injury.
► Always press the vent button before loosening
the oil regulating screw.
WARNING Kickback hazard
Kickback of the machine and cutting blade can
happen very suddenly, when using the upper
quadrant of the cutting blade. This can result in
serious injuries or death.
Never use the upper quadrant of the cutting blade
►
when operating the machine.
WARNING Cutting small pieces hazard
If the work piece is not securely fixed when cutting,
the work piece can fly away and hit the operator.
This can result in personal injury.
► Always secure the work piece before operating
the machine.
9