Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5.
With the main side door open, remove the yellow transport unit shipping lock by rotating it
counterclockwise approximately 45 degrees, aligning it, and then pulling it straight out.
Save the lock for future shipping purposes.
Note: The printer will function with the transport shipping lock installed. However, the
transport unit cannot be removed while the lock is in place.
6.
Grasp the transport unit handle and pull the transport unit straight out of the printer. Then
reinstall the transport unit. Ensure it is fully inserted in the printer.
7.
Close the main side door but leave the lower side door open.
8.
Grasp the maintenance cartridge and pull it straight out of the printer. Then reinstall the
maintenance cartridge. Ensure it is fully inserted in the printer.
9.
Close the lower side door.
2
QL-800 Quick Start Guide
Publicidad
Tabla de contenido
