QuickLabel QL-800 Guía De Arranque Rápido página 6

3. Choose Install Printer Software. The software installation wizard will start.
Note: If the Windows logo testing or publisher verification warning messages appear
during installation, choose to continue the installation.
4. When prompted to select a printer connection method, choose Configure to print using
USB. Then choose Next.
Note: A USB configuration is required for the initial installation. You can later install the
printer as a network printer by following the instructions in the QL-800 User Guide.
5. When prompted, connect the QL-800 to your PC with a USB cable. The installation will
continue once the USB connection is made.
6. When prompted, select whether the QL-800 will be set as the default printer.
7. Choose Finish.
Using the After Shipping Wizard
1. Launch the QL-800 Maintenance Utility.
From the Windows Start Menu, choose Start > All Programs > QuickLabel QL-800 >
QL-800 Maintenance Utility. A language and printer prompt will open.
Select a display language and the QL-800 printer you want to connect to. Choose OK.
2. Choose the Cleaning tab.
3. Choose After Shipping. Follow the on-screen instructions to complete this procedure. This
wizard will guide you through the following actions.
• Preparing the Maintenance Roller
• Installing Ink Cartridges
• Installing the Printhead
These procedures are detailed in the following sections.
4 QL-800 Quick Start Guide