Product Description And Specifications; Product Features; Intended Use; Technical Data - SPIT 332 Manual Original

14 | English
or its own power cord. Contact with a "live" wire
will also make exposed metal parts of the power tool
"live" and shock the operator .
U se suitable detectors to determine if utility lines
 
are hidden in the work area or call the local utility
company for assistance. Contact with electric lines
can lead to fire and electric shock . Damaging a gas
line can lead to explosion . Penetrating a water line
causes property damage or may cause an electric
shock .
W hen working with the machine, always hold it
 
firmly with both hands and provide for a secure
stance. The power tool is guided more secure with
both hands .
S ecure the workpiece. A workpiece clamped with
 
clamping devices or in a vice is held more secure
than by hand .
A lways wait until the machine has come to a
 
complete stop before placing it down. The tool
insert can jam and lead to loss of control over the
power tool .

Product Description and Specifications

Read all safety warnings and all instruc-
tions. Failure to follow the warnings and
instructions may result in electric shock,
fire and/or serious injury .

Intended Use

The machine is intended for hammer drilling in
concrete, brick and stone, as well as for light chisel-
ling work . It is also suitable for drilling without impact
in wood, metal, ceramic and plastic . Machines with
electronic control and right/left rotation are also suitable
for screwdriving .

Technical Data

Rotary Hammer
Speed control
Stop rotation
Right/left rotation
Quick change chuck
Rated power input
Impact frequency at rated speed
Impact energy per stroke according to EPTA-Procedure 05/2009

Product Features

The numbering of the product features refers to the
illustration of the machine on the graphics page .
1 Quick change keyless chuck*
2 SDS-plus quick change chuck
3 SDS-plus tool holder
4 Dust protection cap
5 Locking sleeve
6 Lock ring for rapid-change chuck
7 On/Off switch
8 Release button for mode selector switch
9 Mode selector switch
10 Button for depth stop adjustment
11 Depth stop
12 Auxiliary handle (insulated gripping surface)
13 Rotational direction switch
14 Handle (insulated gripping surface)
15 Drill chuck mounting
16 Identification grooves
17 Front sleeve of the quick change keyless chuck*
18 Retaining ring of the quick change keyless chuck*
19 Universal bit holder with SDS-plus shank*
* Accessories shown or described are not part of
the standard delivery scope of the product. A
complete overview of accessories can be found
in our accessories program.
W
min
J
SPIT 332
•
•
•
•
800
0–4000
-1
3,1