Dispensing Water - Atmospheric Water Solutions AquaBoy Pro II Manual Del Usuario

3. Relative Humidity
Displays the relative humidity surrounding the appliance.
Please note that this appliance will typically begin to generate water between 28 and 32 percent
humidity.
4.
Hot
Hot icon will flash when water is being heated and remains on when hot water tank is full.
5.
Water Generating
AWG icon turns on when water is being made.
6.
Cold
Cold icon will flash when water is being cooled and remains on when cold water tank is full.
7. Filter Replacement
Filter number light will flash when it is time to change the corresponding filter.
8. Hot Water Lock
The hot water lock button must be pressed once prior to dispensing hot water.
9. Hot Water Dispense
After the hot water lock button has been pressed, press and hold the hot water button to dispense.
10. Cold Water Dispense
Press and hold the cold water button to dispense.
Panel Light On/Off
11.
Press panel light button to turn display screen on or off.
Please note that water cannot be dispensed while display is off.

9. DISPENSING WATER

The appliance will dispense "purified great tasting water™" after the water level gauge has reached
1.
the 1/4 mark.
The hot and cold switches need to be on for at least 30 minutes to dispense water at specified
2.
temperatures of 44°F (cold) and 180°F (hot).
To dispense cold water, press and hold the cold water button.
3.
To dispense hot water, the hot water lock button must be pressed once prior to dispensing hot
4.
water. After the hot water lock button has been pressed, press and hold the hot water button to
dispense.
Please note that hot and cold water are only available when hot and cold switches are in the on
5.
position.
www.AtmosphericWaterSolutions.com 8